Extended AR 15 Takedown Pins and Pivot Pins
$40.00
PF-040 (Pins, Forward Controls, 0.040) is an elegantly simple and superbly crafted AR15/M16 takedown and pivot pin set. Machined from 17-4 PH SS bar stock and QPQ finished, these extended ar 15 takedown pins are 0.040 longer than TDP spec pivot and take down pins.
In stock
Description
What We Like About This Product
This enhanced pivot and takedown pin set is one of our favorite additions to lower parts kits because of its versatility. Your firearm becomes much more functional with the extended AR 15 takedown pins, making it easier to pull your pin without a tool.
Product Info
PF-040 pins can be aptly described as “reverse extended”, in that they’re longer on the left side of the lower receiver, the additional length of the take down pin doesn’t interfere with ambidextrous safety operation. When these steel pins are pushed in from the left side, the +0.040 transforms to extra length and grasping area on the right side pin head, which combined with their silky smoothness, makes pulling the pin a cinch with no tool needed.
The PF-040 enhanced AR 15 takedown pins have the same elegant and unadorned pin heads design that is in line with our design philosophy which prioritizes functionality over aesthetics. PF-040 right side pin heads (when installed on a lower receiver, with the muzzle pointing away) are flat, with a small 45 degree chamfer. Serrations or dimples on the right pin head would be useless, so they’re completely plain. There is a small dimple on the other side of the pin head, the tip of bullets (up to 9mm) can be used to push the pins in on tight fitting receivers.
PF-040 pin diameter adheres to TDP dimensions and tolerances, 0.2485 +0.000/-0.005.
Made in the USA.
Related products
-
Sprinco AR 15 Gas Rings
$2.55 Quick ViewAdd to cartSprinco AR 15 Gas Rings
$2.55
A gas ring is an essential part of reliable AR 15 operation. They’re a consumable part, meaning they will wear out over time and eventually need replacing. When looking to replace your gas ring, Sprinco AR 15 gas rings are the best option on the market.
These quality gun parts are made to MIL 848511 standards. Please note a bolt assembly requires 3x gas rings.
In stock
-
Enhanced Ambi Mag Release
$70.00 Quick ViewRead moreEnhanced Ambi Mag Release
$70.00
Read Ambidextrous AR 15 – How To Build Your Own
EMR-A is an ergonomic ambidextrous magazine release. It has an intelligent design of the lever to closely mirror the magazine release button on the right side. The portion immediately below the bolt catch’s lower paddle has a lower profile to avoid interference, typically a common drawback of popular ambidextrous mag catches.
Out of stock
-
Sprinco Extractor Spring
$4.95 Quick ViewAdd to cartSprinco Extractor Spring
$4.95
This is a direct replacement AR-15 extractor spring, whether your current spring is worn out or broken or you are just looking to add a layer of extra reliability, this easy to install extra power extractor spring is for you.
WHY we like it
We love that Sprinco as a company goes the extra mile and produces in our eyes the best extra power extractor spring available, as not all springs are made the same . This enhanced extractor spring provides better extractor tension and heat resistance adding a layer of reliability over the stock spring. This spring is especially great for suppressed use and high round counts. They always come in handy and is a quick fix to a lot of ejection issues. We like to keep spares around of extractor springs ejector spring, and gas rings as you never know when you or a buddy may need them.This comes as a kit includes the black Mil Spec insert, 5 coil spring, and Mil-Spec O- ring.
Please note we only recommend using the O-ring if this 5 coil spring does not alleviate your issues.CHROME SILICON WIRESTOCK
Bolt in picture not included****
In stock
-
Aluminum Rail Covers Forward Controls MCF-A
$35.00 – $38.00 Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageAluminum Rail Covers Forward Controls MCF-A
$35.00 – $38.00
MCF (M-LOK Rail Covers + Forward Controls) is a collaboration between Railscales and Forward Controls Design. Machined in G10, with the AA surface (All Angles or dimpled) pattern.
You may also like
Reinforced AR 15 Buffer Retainer
$8.00 Quick View
Reinforced AR 15 Buffer Retainer
$8.00
Upgrade your stock AR 15 buffer retainer to prevent damage to the lower parts. Stock buffer retainer pins often break, causing the buffer retainer pin to shear off part of the tip, which will then become lodged somewhere in the fire control group, stopping the rifle from functioning. Save your lower parts from damage by getting this Reinforced Buffer Retainer, or RBR—a small price to pay for peace of mind.
In stock
Aluminum Rail Covers Forward Controls MCF-A
$35.00 – $38.00 Quick ViewAluminum Rail Covers Forward Controls MCF-A
$35.00 – $38.00
MCF (M-LOK Rail Covers + Forward Controls) is a collaboration between Railscales and Forward Controls Design. Machined in G10, with the AA surface (All Angles or dimpled) pattern.
Ambidextrous Bolt Release – PDQ
$59.95 – $64.95 Quick View
Ambidextrous Bolt Release – PDQ
$59.95 – $64.95
Read Ambidextrous AR 15 – How To Build Your Own
The crown jewel of the Guntology catalog, the PDQ Ambi Bolt Release puts the operator in control of the firing grip at all times. The trigger finger moves from trigger to mag release to bolt release smoothly without moving the weapon from the shoulder. That’s where this handy ar15 ambidextrous bolt release gets its name, PDQ (pretty damn quick).. When seconds count, and your life and others are depending on you, count on PDQ. The PDQ Ambi-Bolt Release™ is made in the United States and uses Military-grade steel, hardened and Military Spec 8526 Class 3 type 2 coated to last a lifetime of operational conditions. The lower will need some small modifications to accept the PDQ. It is not a drop in product.
Ambidextrous Safety Selector Forward Controls – 50-Degree Throw
$83.00 Quick View
Ambidextrous Safety Selector Forward Controls – 50-Degree Throw
$83.00
Read AR-15 Safety Selector: Choosing Your Best Fit
The ASF-50 is a short throw (rotate to 50 degree for FIRE/SEMI) semi auto AR 15 safety selector that comes configured with offset levers for ambidextrous use. This selector lever replaces the factory lever in your AR 15.
In stock
Enhanced Ambi Mag Release
$70.00 Quick ViewEnhanced Ambi Mag Release
$70.00
Read Ambidextrous AR 15 – How To Build Your Own
EMR-A is an ergonomic ambidextrous magazine release. It has an intelligent design of the lever to closely mirror the magazine release button on the right side. The portion immediately below the bolt catch’s lower paddle has a lower profile to avoid interference, typically a common drawback of popular ambidextrous mag catches.
Out of stock
AR 15 Extended Mag Release
$18.00 Quick View
AR 15 Extended Mag Release
$18.00
The Enhanced Magazine Release-High model (EMR-H) features a slightly curved button surface to fit the natural curvature of your finger. The form-fitting curve, along with horizontal serrations, creates a self-centering surface that inhibits the finger’s vertical movements. The EMR-H has a milspec through hole for the mag catch’s shaft and is only 0.02″ taller than the factory AR 15 magazine release button. When installed, the EMR-H has minimal protrusion above the AR 15 mag release button fence on most forged receivers.
In stock
Sprinco Enhanced AR 15 Ejector Spring
$4.39 Quick View
Sprinco Enhanced AR 15 Ejector Spring
$4.39
Having a dependable AR 15 ejector spring is a key component to having consistent ejection of cartridge cases in your firearm. This Sprinco Enhanced bolt ejector spring is an amazing addition to AR 15 bolt carrier groups. It’s easy to install and provides a long service life. (This spring is also a safety selector spring). If you are adding upgrades to enhance the reliability of your lower receiver, do not overlook this AR 15 ejector spring.
Why we like it
This enhanced bolt ejector spring is a true upgrade from the OEM spring with a longer service life. This is what we use in our personal ar-15’s and recommend them to everyone. We like to keep spares around of ejector spring, extractor spring and gas rings as you never know when you or a buddy may need them.
Bolt in picture not included****
In stock
Low Snag AR 15 Forward Assist
$48.00 Quick View
Low Snag AR 15 Forward Assist
$48.00
Read What is an AR 15 forward assist?
The standard AR 15 forward assist design can be an annoying snag hazard for your fingers and knuckles, especially with the use of an ambidextrous charging handle.
Forward Controls designed this forward assist assembly to be a sleek, snag-free, rimless design that complements the use of an ambidextrous charging handle while remaining finger and knuckle friendly.
In stock
Sprinco Extractor Spring
$4.95 Quick ViewSprinco Extractor Spring
$4.95
This is a direct replacement AR-15 extractor spring, whether your current spring is worn out or broken or you are just looking to add a layer of extra reliability, this easy to install extra power extractor spring is for you.
WHY we like it
We love that Sprinco as a company goes the extra mile and produces in our eyes the best extra power extractor spring available, as not all springs are made the same . This enhanced extractor spring provides better extractor tension and heat resistance adding a layer of reliability over the stock spring. This spring is especially great for suppressed use and high round counts. They always come in handy and is a quick fix to a lot of ejection issues. We like to keep spares around of extractor springs ejector spring, and gas rings as you never know when you or a buddy may need them.
This comes as a kit includes the black Mil Spec insert, 5 coil spring, and Mil-Spec O- ring.
Please note we only recommend using the O-ring if this 5 coil spring does not alleviate your issues.
CHROME SILICON WIRESTOCK
Bolt in picture not included****
In stock
Reviews
There are no reviews yet.