-
Aluminum Rail Covers Forward Controls MCF-A
$35.00 – $38.00 Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageAluminum Rail Covers Forward Controls MCF-A
$35.00 – $38.00
MCF (M-LOK Rail Covers + Forward Controls) is a collaboration between Railscales and Forward Controls Design. Machined in G10, with the AA surface (All Angles or dimpled) pattern.
-
Ambidextrous Bolt Release – PDQ
$59.95 – $64.95 Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageAmbidextrous Bolt Release – PDQ
$59.95 – $64.95
Read Ambidextrous AR 15 – How To Build Your Own
The crown jewel of the Guntology catalog, the PDQ Ambi Bolt Release puts the operator in control of the firing grip at all times. The trigger finger moves from trigger to mag release to bolt release smoothly without moving the weapon from the shoulder. That’s where this handy ar15 ambidextrous bolt release gets its name, PDQ (pretty damn quick).. When seconds count, and your life and others are depending on you, count on PDQ. The PDQ Ambi-Bolt Release™ is made in the United States and uses Military-grade steel, hardened and Military Spec 8526 Class 3 type 2 coated to last a lifetime of operational conditions. The lower will need some small modifications to accept the PDQ. It is not a drop in product.
-
Ambidextrous Safety Selector Forward Controls – 50-Degree Throw
$83.00 Quick ViewAdd to cartAmbidextrous Safety Selector Forward Controls – 50-Degree Throw
$83.00
Read AR-15 Safety Selector: Choosing Your Best Fit
The ASF-50 is a short throw (rotate to 50 degree for FIRE/SEMI) semi auto AR 15 safety selector that comes configured with offset levers for ambidextrous use. This selector lever replaces the factory lever in your AR 15.
In stock
-
AR 15 Extended Mag Release
$18.00 Quick ViewAdd to cartAR 15 Extended Mag Release
$18.00
The Enhanced Magazine Release-High model (EMR-H) features a slightly curved button surface to fit the natural curvature of your finger. The form-fitting curve, along with horizontal serrations, creates a self-centering surface that inhibits the finger’s vertical movements. The EMR-H has a milspec through hole for the mag catch’s shaft and is only 0.02″ taller than the factory AR 15 magazine release button. When installed, the EMR-H has minimal protrusion above the AR 15 mag release button fence on most forged receivers.
In stock
-
Enhanced Ambi Mag Release
$70.00 Quick ViewRead moreEnhanced Ambi Mag Release
$70.00
Read Ambidextrous AR 15 – How To Build Your Own
EMR-A is an ergonomic ambidextrous magazine release. It has an intelligent design of the lever to closely mirror the magazine release button on the right side. The portion immediately below the bolt catch’s lower paddle has a lower profile to avoid interference, typically a common drawback of popular ambidextrous mag catches.
Out of stock
-
Extended AR 15 Takedown Pins and Pivot Pins
$40.00 Quick ViewAdd to cartExtended AR 15 Takedown Pins and Pivot Pins
$40.00
PF-040 (Pins, Forward Controls, 0.040) is an elegantly simple and superbly crafted AR15/M16 takedown and pivot pin set. Machined from 17-4 PH SS bar stock and QPQ finished, these extended ar 15 takedown pins are 0.040 longer than TDP spec pivot and take down pins.
In stock
-
Low Snag AR 15 Forward Assist
$48.00 Quick ViewAdd to cartLow Snag AR 15 Forward Assist
$48.00
Read What is an AR 15 forward assist?
The standard AR 15 forward assist design can be an annoying snag hazard for your fingers and knuckles, especially with the use of an ambidextrous charging handle.
Forward Controls designed this forward assist assembly to be a sleek, snag-free, rimless design that complements the use of an ambidextrous charging handle while remaining finger and knuckle friendly.
In stock
-
Reinforced AR 15 Buffer Retainer
$8.00 Quick ViewAdd to cartReinforced AR 15 Buffer Retainer
$8.00
Upgrade your stock AR 15 buffer retainer to prevent damage to the lower parts. Stock buffer retainer pins often break, causing the buffer retainer pin to shear off part of the tip, which will then become lodged somewhere in the fire control group, stopping the rifle from functioning. Save your lower parts from damage by getting this Reinforced Buffer Retainer, or RBR—a small price to pay for peace of mind.
In stock
